Four connection modes of pipeline electromagnetic flowmeter

Electromagnetic flowmeter is a kind of flow meter with high precision, high reliability and long service life. It consists of a controller that immediately touches the medium of the pipeline and an upper signal converter. This is the application scenario in Faraday's law of electromagnetic induction. It is used * to measure the total flow rate of conductive liquids with conductivity exceeding 5μs/cm. It is a dashboard for measuring the total flow rate of conductive media. In addition to being able to measure the total flow of normal conductive liquid slurry, it can be used to measure the slurry of strong corrosive liquid such as strong alkali and strong acid and liquid slurry with liquid-solid two-phase floating, such as drilling mud, pulp, paper paddle, etc. Before customers choose electromagnetic flowmeter and apply electromagnetic flowmeter, they should connect the electromagnetic flowmeter with the pipeline. It is also different from the connection methods of pipelines. There are several types of connection modes: 1. Looper flange: this type of connection mode is relatively traditional, and there are always flange plates that can be connected on both sides of electromagnetic flowmeter, at the time of connecting with the pipeline, if the flange plates on both sides and the flange plates on the pipeline are used with anchor bolts (Composition: head top and extruder screw) It is good to fix it, and this type of connection can be installed unilaterally. This kind of connected controller has a relatively small volume and is only suitable for application in small pipelines. Second, clip-on connection: this type of connection is relatively simple. Some electromagnetic flowmeters that are also called flange plate boss plate or flange are selected for this type of connection, and can use anchor bolts (Composition: head top and extruder screw) Clamped in the middle of the two flange plates of the pipeline, the connection method is very simple. Construction of electromagnetic flowmeter the key construction of electromagnetic flowmeter consists of magnetic circuit system software, measuring hose, electrical grade, casing, lining and converter. Everyone must understand the installation and installation of electromagnetic flowmeter, and it is not easy to make incorrect installation and installation at that time. Three, threaded connection: Also some caliber electromagnetic flowmeter uses threaded connection, which is usually applied in diagnosis and treatment and food enterprises. Electromagnetic flowmeter is 30 New Century 60 ~ With the development trend of electronic information technology and the rapid development trend of the 65 era, the new total flow detection instrument is becoming more and more popular. Electromagnetic flowmeter is an instrument that uses the principle of electromagnetic induction and measures the total flow of conductive fluid mechanics according to the electromotive force induced by electromagnetic field. On the other hand, such connections are also necessary in crude oil and exploration. IV. Sanitary connection: Nowadays, some caliber pipelines are selected to refer to this kind of connection. People often call sanitary connection a clamp connection. According to this kind of connection, it can quickly install and disassemble the electromagnetic flowmeter, and its daily cleaning and maintenance are very convenient. Electromagnetic flowmeter is 30 New Century 60 ~ With the development trend of electronic information technology and the rapid development trend of the 65 era, the new total flow detection instrument is becoming more and more popular. Electromagnetic flowmeter is an instrument that uses the principle of electromagnetic induction and measures the total flow of conductive fluid mechanics according to the electromotive force induced by electromagnetic field.