There are certain restrictions on the fluid pressure and temperature that electromagnetic flowmeters can measure

The fluid pressure and temperature that an electromagnetic flowmeter can measure is limited. When selecting, the operating pressure must be lower than the specified working pressure of the flowmeter. At present, the working pressure specifications of the electromagnetic flowmeters produced in China are: less than 50mm diameter, working pressure of 1.6MPa, 900 mm diameter, working pressure of 1MPa; greater than 1000mm diameter, working pressure of 0.6MPa. The fluid pressure and temperature that an electromagnetic flowmeter can measure is limited. When selecting, the operating pressure must be lower than the specified working pressure of the flowmeter. At present, the working pressure specifications of the electromagnetic flowmeters produced in China are: less than 50mm diameter, working pressure of 1.6MPa, 900 mm diameter, working pressure of 1MPa; greater than 1000mm diameter, working pressure of 0.6MPa. If there are special requirements for the pressure resistance of the transmitter, you can consult with the manufacturer. The electromagnetic flowmeter produced by our Jiangsu Huahai measurement and control manufacturer has been able to manufacture an electromagnetic flow transmitter with a pressure resistance of 32MPa. The operating temperature of the electromagnetic flowmeter depends on the lining material used, and is generally 5 to 70°C. If special treatment is done, the above range can be exceeded. The electromagnetic flowmeter produced by Jiangsu Huahai Measurement u0026 Control is a wear-resistant and corrosion-resistant electromagnetic flowmeter. The transmitter allows the temperature of the measured medium to be -40 to 130°C. For more product details, please click the above product picture or click on the official website of Huahai Measurement u0026 Control: www.ehuahai.com Service Hotline: 400-828-5048