PRODUCT
-
Flow Meter
- Liquid
- Gas
- Level
- Pressure
- Temperature
-
Water Analysis
- GDC: General Display & Controller
- STU: Turbidity & SS
- Fluorescence Dissolved Oxygen
- IN-SITU Spectra Analyzer
- SCD/SS: Conductivity/Salinity
- SOW: PAH or Oil-in-Water
- SFC: Free Chlorine Sensor
- SANH:Ammonium/Nitrate ISE Sensor
- Smart Sensor
- SUM: Ultrasonic Sludge Blanket Monitor
- SUL:Ultrasonic Level Sensor
- Velocity Sensor
How far is the installation threshold of the flowmeter?
by:Sure
2021-08-20
Everyone should know the installation of the flowmeter. The installation position of the flowmeter in the pit should not be too high for the straight pipe section; and the threshold is very low, but it has very special advantages, such as a high degree of intelligence and networking, etc. Features. For the current domestic tap water companies, many flow meters used in factory water measurement have special requirements compared with other fields. Everyone should know the installation of flow meters. The installation position of flow meters in the pit does not require straight pipe sections. Too high; and the threshold is very low, but very special advantages, with a high degree of intelligence and networking characteristics. For the current domestic tap water companies, many flow meters used in the measurement of factory water have their special requirements compared with other fields. Their characteristics are very clear: the diameter of the flowmeter is relatively large, and the flow rate of the flowmeter is greater than DN1000 mm, while the largest diameter used in China reaches DN3000 mm; second: the flow rate of water is relatively large, generally thousands to tens of thousands m3/h; Finally, in order to meet the requirements of the water supply loss rate, the metering accuracy of the flowmeter is high, generally better than 0.5%, or even 0.3%; Also, the flowmeter mainly provides parameters for process operation and reasonable scheduling, so as For after-sales service, the foreign water supply industry mainly chooses domestic products when using flow meters. The flow meters used are as simple as possible in structure and do not pursue higher accuracy levels. Some developed countries have no limit on the loss rate of water supply. This is why the flow meters are used. Craftsmanship is becoming more and more important.
Custom message