Home | PRODUCT |

SURE-BK Standard Orifice Plate Flow Meter

这里可以自定义设置

Diameter: 50mm≤DN≤1000mm, if DN＞1000mm, real flow calibration is required

Aperture Ratio β: 0.20≤β≤0.75

Pressure: PN≤16MPa

Reynolds No. Range: When 0.20≤β≤0.45, 5000≤ReD; When 0.45≤β≤0.75, 10000≤ReD

Range Ratio: 1:5, 1:10, 1:65

Inquire Online
Download

Cancel

Add success, do you want to check your shopping cart?

Ok Close

该产品后台详情无内容

Description

SURE-BK standard orifice plate can be used to measure the flow of liquid, gas and steam in the pipeline. The SURE-BK standard orifice plate is designed and manufactured according to the national standard GB/T2624-2006 (equivalent to ISO 5167-2003), and verified according to the national standard JJG640-2016. The standard orifice plate can adopt three pressure-taking methods: corner connection (including ring chamber pressure), flange pressure and D-D/2Q pressure. The standard orifice plate designed, manufactured and verified according to the national standard does not need real-flow calibration, and has high precision, simple structure and local manufacturing cost.

Features

- When installing, ensure that the center of the orifice plate, the axis of the flange, the axis of the pipe, the axis of the pipe and the gasket are concentric, and the non-concentricity shall not exceed 0.002D/β

- The direction of high and low pressure of the orifice plate, the upstream and downstream pressure-taking flanges should be consistent with the flow direction of the medium, and the orientation of the pressure-taking holes can be determined according to the different media and the installation of the transmitter (refer to the SURE-BK manual).

- Optional with upstream and downstream straight pipe sections.

- The D-D/2 pressure gauge is supplied as a complete set, and the flange connection can be directly installed.

APPLICATION

- Gas

- Liquid

- Steam

ONLINE CONSULTATIO

MODEL SELECTION

Model	Suffix Code							Description
SURE-D	1	2	3	4	5	6	7	Standard Orifice Plate Flow Meter
Medium	L							Liquid
	G							Gas
	S							Steam
Material		C						Carbon steel
		S						Stainless steel
		O						Other
Flange			A					ANSI(HG20615)
Flange			D					DIN(HG20592)
Installation			1					Single-ended fixation
Installation			2					Double-ended fixation
Connection				1				Flange
Connection				2				With front and rear straight pipe sections, butt welding connection
Pressure					A			Angle joint pressure
					F			Flange pressure
					D			D-2/2 take pressure
Diameter						50		DN50
						65		DN65
						80		DN80
						...		...
						1000		DN1000
Pressure							25	0.25MPa
							6	0.6MPa
							10	1MPa
							...	...
							160	16MPa

ONLINE CONSULTATIO

If you run into any issue or have any question.

Call us

+86 13821000231

Sitemap

Leave Your Message inputting...

Hello, dear customer, due to the large number of inquiries, it may not be able to reply to you in time, you can call our contact number +86 13821000231 to contact us as soon as possible.

Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.

*Name：

*Phone：

*E-mail：

*Content：