Ultrasonic Magnetic Vortex Flow Meter Manufacturer, Sure We Are, Sure To Be Better | ✉ overseas@suremeter.com
Throttle: 100≤DN≤1800mm
Aperture Ratio: 0.245≤β≤0.6;0.046≤Cβ2(1-β4)-0.5≤0.326;ReDmin≤ReD≤105β, ReDmin=1000β+9.4*106(β-0.24)8; d≥15mm, D≤500mm
Pressure: PN≤10MPa
Temp.: -50℃...545℃
Description
No matter what kind of standard throttling device, it specifies the scope of application for pipe diameter, Reynolds number, throttling aperture ratio, etc., and cannot be used for flow measurement outside this range. In industrial production, there are often fluids with small diameter, low flow rate and high viscosity. For such working conditions, 1/4 round orifice plates must be used.
Features
- It is applicable to the regulation that the pipe diameter and Reynolds number are smaller than the standard throttling device, and its outflow coefficient is almost a constant value.
- The measurement requirements, pressure taking method and installation method are close to the standard throttling device.
- A large number of experiments have been carried out at home and abroad, and there are a large number of databases to check. Design calculations can refer to standard throttling devices.
- There are mature data on the structural form, the thickness of the orifice plate, and the inlet shrinkage arc surface.
Model | Suffix Code | Description | ||||||
SURE-1/4 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | A Quarter Circle Orifice Plate Flow Meter |
Medium | L |
|
|
|
|
|
| Liquid |
G |
|
|
|
|
|
| Gas | |
S |
|
|
|
|
|
| Steam | |
Material | C |
|
|
|
|
| Carbon steel | |
S | Stainless steel | |||||||
O | Other | |||||||
Flange | A |
|
|
|
| ANSI(HG20615) | ||
D |
|
|
|
| DIN(HG20592) | |||
Installation | 1 |
|
|
|
| Single-ended fixation | ||
2 |
|
|
|
| Double-ended fixation | |||
Connection | 1 |
|
|
| Flange connection pipe type | |||
2 |
|
|
| Flange connection wafer type | ||||
3 | Welding | |||||||
4 | Custom Structure | |||||||
Pressure | A |
|
| Angle joint pressure | ||||
F |
|
| Flange pressure | |||||
D |
|
| D-2/2 take pressure | |||||
Diameter | 50 |
| DN50 | |||||
65 |
| DN65 | ||||||
80 | DN80 | |||||||
... | ... | |||||||
1000 | DN1000 | |||||||
Pressure | 25 | 0.25MPa | ||||||
6 | 0.6MPa | |||||||
10 | 1MPa | |||||||
100 | 10MPa | |||||||
... | ... |
Copyright © 2019 Tianjin Sure Instrument Co., Ltd. | All Rights Reserved 津ICP备08002549号-2
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.